SHENZHEN LED DISPLAY FACTORY
Factory-direct COB and MIP fine pitch displays, crystal film and creative installations for control rooms, retail and outdoor media. Engineered to the site, supplied with control guidance.
Documented quality
Batch test reports travel with the shipment
Certified build
CE · RoHS · FCC · UL · ISO 9001
2–3 year warranty
Modules, power supplies and control cards
24h engineer reply
A configuration answer, not an auto-reply
Command rooms, retail frontage, transport hubs and public venues each set different limits on pitch, brightness and service access. Start from the room you are fitting.
Storefront windows, atriums and flagship interiors
24/7 monitoring walls and dispatch rooms
Boardrooms, lobbies and hybrid meeting rooms
Facades, roadside billboards and city screens
Airports, rail stations and bus terminals
Seven series built on one engineering standard. Choose by transparency, pixel pitch, brightness and installation type.
NEW
P0.7–P1.9
Flip-chip COB with 200,000:1 contrast and IP65 front protection.
COB fine pitch at 200,000:1.
NEW
P0.9–P1.8
Micro LED in Package for high-brightness fine pitch environments.
MIP brightness in a sealed package.
NEW
75–95% transparency
Crystal film, holographic mesh and framed transparent cabinets.
Turn glass into media without blocking daylight.
NEW
Custom structures
Light pole, art and mechanical LED installations built to the site.
Engineered LED structures, not standard rectangles.
P2.6–P4.81
Quick-lock cabinets for touring, events and stage production.
Rental LED, tour-ready and camera-safe in minutes.
P0.97–P2.5
Slim fixed installation for lobbies, meeting rooms and retail.
Indoor fixed LED, fine pitch without rear access.
P2.6–P10
IP65 common-cathode cabinets for outdoor media and facades.
Outdoor fixed LED, IP65 brightness for direct sun.
Numbers buyers can verify before they specify, and higher value at the same specification.
About UsSix to ten times typical SMD panels, with deeper blacks in lit rooms.
Common-cathode design cuts running cost across the display's life.
Clean capture on camera at any shutter angle.
600×337.5mm 16:9 cabinets with flatness ≤0.05mm.
Transparent, creative, COB P0.7–P1.9 and MIP P0.9–P1.8 from one factory.
Hot-swap modules without rear access.
No trading layers. 5–7 days for standard models.
Cost-performance
The advantage comes from how the wall is built and supplied, not from cheaper components. Send any comparable quotation and we will return a line-by-line comparison of cabinet, power, control and spares cost.
Request a cost comparisonNo trading layers
Quoted from the Shenzhen factory, with no agent margin between your order and production.
Up to 44% lower power
Common-cathode drive cuts electricity and heat load, reducing running cost across the service life.
Lower maintenance cost
Front-service modules and a documented spare ratio shorten downtime and site visits.
Line-by-line comparison
Cabinet, power supply, control system and spare parts are listed separately, so you can compare the same scope rather than a headline price.
Three LED technologies, one decision: the image, the budget and the installation environment.
| Parameter | COB | MIP | SMD |
|---|---|---|---|
| Contrast ratio | 200,000:1 | 15,000:1 | 20,000–30,000:1 |
| Brightness | 600–1,000 nits | 3,850 nits | 800–1,500 nits |
| Power consumption | Up to 44% lower | Low | Baseline |
| Front protection | IP65 | IP43 | IP40 |
| Best for | Control rooms, boardrooms | Command centres, studios | Budget indoor signage |
Figures are typical values for the listed series. Final configuration is confirmed on the datasheet.
Installed where the display has to work every day.
McDonald's
P1.25 COB displays replaced printed menus across flagship locations, with 200,000:1 contrast keeping food imagery readable under bright restaurant lighting.
ZTE Corporation
A 200+ m² P0.9 COB video wall runs 24/7 for network monitoring, with redundant power and signal paths.
Wanda Group
Self-adhesive crystal film turned glass facades into advertising surfaces while keeping 95% transparency.
How a project runs
Room drawing, viewing distance, content examples and installation type. A survey template is provided if the site is still open.
Day 1
We confirm pitch, cabinet count, power and control, then send a quotation with the acceptance checklist for the project.
Within 24 business hours
Modules are assembled, aged, calibrated and photographed in Shenzhen. Batch records follow the shipment.
5–7 days for standard models
Drawings, packing list, commissioning settings and spare ratio are issued per project, with remote support during installation.
On site
Client feedback
We compared three suppliers on the same drawing. XL was the only one that asked for the glass mullion spacing before quoting, and the film arrived cut to those dimensions. Installation took two nights instead of the week we had planned. The client is very satisfied with the result.
Daniel R.
Project Manager · Spain
The control room wall has been running continuously since handover. What mattered to our operators was the small map labels staying sharp at desk distance, and that has held up in daily use. We would specify the same wall again.
Marek W.
Technical Director · Poland
We tour the perimeter screens through a full season. The cabinets still lock together without shimming, and the numbered flight cases mean a local crew can rebuild the wall without our team flying out. The rental package has been very reliable.
Julia K.
Event Production Lead · Germany
Document copies are supplied with the shipping papers and available on request.
Not marketing copy: the documents our engineers sign off before the cabinets leave the line.
Batch test report
Brightness, dead-pixel count and flatness recorded for the exact modules in your order.
Approval drawing
Cabinet layout, wiring and steel structure drawing issued for sign-off before production.
Certification copies
CE, RoHS, FCC, UL and ISO 9001 documents supplied with the shipping papers.
Spare parts schedule
Module, power supply and receiving card part numbers listed so reorders stay compatible.
One cabinet is accepted for sample and quality testing. Mixed-model orders are also supported.
Standard models ship in 5–7 days. Custom cabinets and large projects take 10–15 days after drawing approval.
T/T bank transfer, PayPal and credit card for small orders. Terms are confirmed on the proforma invoice.
2–3 years depending on the series, covering modules, power supplies and control cards.
We provide drawings, remote commissioning and video support. On-site engineers can be arranged for large projects.
Pixel pitch, viewing distance, installation type. Send what you have and we will reply with a configuration and a quote.
