01
Primary structure
A steel or aluminium frame carries the display and transfers wind and self-weight to the building or foundation. The section is selected from the installation height and site load.
Creative LED Display Series
Light Pole LED Screen
Street-level media built into the pole.
P1.86–P3.846 · 3–12 m · double-sided or 360°
A street-light pole with integrated LED panels for roadside advertising, community notices and smart-city information. The structure is calculated for wind load and supplied with a maintenance access door.
To drawing
Structure engineered per site
Wind-load
Calculated for the installation height
Pixel mapping
Content mapping supplied with the build
- 3–12 m pole heights
- Double-sided or 360° layout
- IP65 outdoor enclosure
- Wind-load calculated structure
Advantages
Integrated structure
Display, power and pole arrive as one engineered assembly.
Roadside brightness
5,000–7,000 nits stays readable in daylight.
Remote publishing
4G or LAN control for scheduled advertising and notices.
Service access
Lockable door for power and control maintenance.
Light Pole LED Screen
Structure introduction
Light Pole LED Screen is engineered around the site rather than a standard cabinet grid. The structure, module layout and mounting points are produced from a drawing that fixes the shape, viewing direction and access route.
Custom cylindrical cabinet
02
Module layout
Modules are arranged to the drawing, with cut modules and edge details planned so the visible shape matches the design.
03
Driver and power enclosure
Power supplies and receiving cards sit in a protected enclosure with a service route that does not disturb the visible surface.
04
Mounting interface
Base plate, wall bracket or suspension points are detailed for the actual structure, including access for adjustment after installation.
Design details
The decisions that affect how Light Pole LED Screen looks, installs and stays serviceable on site.
01
Shape from drawing
The display is not forced into a rectangular cabinet grid. The outline, radius and edge treatment follow the approved drawing.
02
Viewing direction
Module orientation and brightness are set for the direction people actually approach the installation.
03
Content mapping
A pixel map is supplied so artwork can be produced for the exact shape without stretching or guessing the active area.
04
Service route
Access panels and removable modules are planned before fabrication, so maintenance does not require dismantling the artwork.
Front maintenance
Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.
Access panel service
Service panels are located on the least visible face. Modules and electronics are reached without removing the whole installation.
Module replacement
Replacement modules are supplied to the project drawing. The pixel map identifies the exact position for the replacement.
Structure inspection
Outdoor and pole-mounted units include a fixing and structure inspection schedule in the handover pack.
Product credibility
Documented before it ships
Light Pole LED Screen is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.
ISO 9001
Factory process control
CE / RoHS / FCC
Product compliance
Batch tested
Aging and calibration record
2–3 years
Standard warranty
Quality record
- CE, RoHS and FCC documentation for the supplied configuration.
- Aging and white-balance calibration record per batch.
- Cabinet drawing, pixel map and control settings in the handover pack.
- Spare modules matched to the original production batch.
Applications
Roadside advertising
Municipal and commercial media along streets.
Smart city
Public information, air quality and alerts.
Campus and parks
Wayfinding and event notices.
Petrol stations
Forecourt promotion at eye level.
Model range
Each model links to its cabinet, specification and installation notes.
Light pole selection
Design the pole for the road, not the showroom
A light pole display is an outdoor structure with a screen attached. Pole height, road position, wind load and foundation decide the build before brightness is discussed.
013–12 m pole
Fix the pole height and viewing cone
A 3–5 m pole suits pedestrian and forecourt viewing; 6–12 m poles serve roadways and plazas. The display height and tilt are set from the traffic and pedestrian approach.
02Double-sided or 360°
Choose single, double or 360°
Double-sided panels serve two directions of traffic. A 360° layout is used where people approach from multiple sides. The cabinet and power distribution follow the chosen layout.
03Wind-load calculation
Confirm wind load and foundation
The pole, base and anchor detail are reviewed against the site wind load. The foundation and access door are part of the delivery, not an afterthought.
Deployment playbook
Light pole installations
The same pole family can serve commercial advertising, municipal information and campus wayfinding with different control and content plans.
01
Roadside advertising
The display faces traffic and runs scheduled campaigns. High brightness, remote publishing and a lockable service door are the base requirements.
P2.56–P3.846 · 5,000–7,000 nits · 4G control
02
Smart-city information
Public messages, alerts and environmental data share the screen. The control platform supports scheduled and remote content.
P1.86–P3.125 · IP65 · remote management
03
Campus and parks
Wayfinding and event notices are viewed at walking pace. A lower-height pole and a clear content hierarchy are preferred.
P1.86–P2.56 · 3–6 m pole · pedestrian viewing
Delivery control
Pole fabrication and foundation
The pole is fabricated with the display, power and control integrated. The foundation drawing and lifting points are issued before shipment.
Handover pack
- Approved cabinet layout and pixel map
- Control settings and calibration record
- Packing list, spare list and service notes
- 1
Freeze the drawing
Approved layout, pixel map and power scheduleCabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
- 2
Match the batch
Batch record and module position listLED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
- 3
Age and calibrate
Aging log and calibration fileAssembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
- 4
Pack for the route
Packing list, spare list and handover packCabinets are packed against the transport method and site access. The packing list includes the foundation template, anchor set and commissioning checklist.
Buyer questions
Questions we answer before quotation
These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.
Ask an engineer01Is the foundation included?
The foundation design and anchor template are included, while the civil work is completed locally. The drawing is issued for the site conditions before fabrication.
02How is the display controlled?
The pole can use 4G, Wi-Fi or LAN control depending on the site. Content can be scheduled remotely, and the control hardware is located behind the lockable service door.
03Can the pole carry two different screens?
Yes. Double-sided and 360° layouts are available. The power and control distribution are designed for the selected layout.
04What wind load is required?
Wind load is set by the installation location and height. The pole and foundation are reviewed against the project requirement, and the final calculation is included in the drawing package.
Next step
Plan the street installation
Use the outdoor media guide and references to confirm pole height, foundation and control.
Outdoor media guide
See how this series is specified against viewing distance, room light and installation constraints.
Open application guideInstalled references
Review project types, cabinet formats and the delivery scope used on comparable installations.
View case studiesDatasheets and drawings
Request the current specification sheet, cabinet drawing and control compatibility list.
Open downloadsTalk to an engineer
Send the wall size, viewing distance and site photos. We reply with a configuration and quotation.
Request a quoteControl-system compatibility confirmed with the quotationCE / RoHS / FCC documentation for the supplied configuration
Plan a light pole display
Tell us the pole height and road position. We will provide a structure drawing.