MIP LED

MIP P1.5

Name: MIP P1.5 LED Display
Brand: XL Technology

A practical MIP pitch for boardrooms and monitoring walls viewed from three metres.

1.5mm

Pixel pitch

3,850 nits

Brightness

>7680Hz

Refresh rate

Get Quote MIP LED

Product overview

P1.5 balances detail and budget for rooms that are larger than a boardroom but do not require P0.9. It is often used for security monitoring walls and multi-window data displays.

Every unit is assembled and tested in Shenzhen before packing. Cabinet drawings, pixel map and control-system settings are supplied with the shipment, so the configuration on site matches the quotation.

Security monitoringBoardroomsOperations centresMuseums

Specifications

Pixel pitch: 1.5mm
Brightness: 3,850 nits
Refresh rate: >7680Hz
Contrast: 15,000:1
Avg power: ≤220 W/m²
Cabinet size: 600 × 337.5mm
Cabinet weight: 6.2kg
Module size: 300 × 168.75mm
Grayscale: 16-bit
Viewing angle: 170° horizontal / 170° vertical
Control system: Novastar / Colorlight compatible
Front protection: IP43

Advantages

Engineering decisions behind MIP P1.5, and what they change on site.

Multi-window clarity

Enough density to show four or six simultaneous feeds without losing text legibility.

Brightness headroom

3,850 nits keeps the wall readable when ambient light cannot be reduced.

Shared control platform

Works with mainstream processors, so existing control hardware can often be reused.

MIP P1.5

Structure introduction

MIP P1.5 uses MIP packaging: each RGB die is packaged before the module is assembled. The 600 × 337.5mm cabinet then carries the packaged module, driver and power supply as a front-service unit.

600 × 337.5mm

Packaged LED die

Packaging protects each die before module assembly and creates a more uniform black surface than an exposed lamp array.

Module and driver board

The packaged LEDs are mounted to the driver board as one module, keeping the pixel structure stable through handling and service.

Cabinet and mounting frame

A machined frame holds the module plane and provides wall or recessed mounting points. The frame is the reference for seam planning.

Power and control carrier

Receiving cards and power supplies sit on a serviceable carrier behind the module, accessible from the front.

Design details

The decisions that affect how MIP P1.5 looks, installs and stays serviceable on site.

Uniform black face

The packaged surface lowers reflectance and keeps the wall visually calm when content is dark, which suits control rooms and boardrooms.

Brightness headroom

3,850 nits gives the wall room to run at reduced output in dim rooms while still meeting daylight conditions in lobbies.

Thermal path for 24/7 use

The package and board are selected for continuous operation, with heat spread across the cabinet rather than concentrated at the module centre.

Camera-safe drive

High refresh and grayscale depth keep scan lines out of video calls and broadcast footage.

Front maintenance

Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.

Front-service module design

Front module access

The module is released from the front, so a wall in a finished room can be serviced without rear clearance.

Driver and PSU replacement

Receiving cards and power supplies are field-replaceable units. The cabinet can remain on the wall during replacement.

Colour matching

Spare modules are supplied from the project batch and checked against the calibration record before dispatch.

Product credibility

Documented before it ships

MIP P1.5 is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.

ISO 9001

Factory process control

CE / RoHS / FCC

Product compliance

Batch tested

Aging and calibration record

2–3 years

Standard warranty

Project references Client feedback

Quality record

CE, RoHS and FCC documentation for the supplied configuration.
Aging and white-balance calibration record per batch.
Cabinet drawing, pixel map and control settings in the handover pack.
Spare modules matched to the original production batch.

MIP selection and delivery

Use MIP where brightness headroom matters

MIP packaging gives a uniform black face with useful brightness headroom. It is a strong fit for rooms that mix presentations, camera work and daylight, but it should be selected against COB on contrast, service and budget.

013,850 nits

Check the room light first

If the wall faces windows or is used with house lights up, MIP's brightness range gives more room to run at reduced output without losing colour. In a dark room, COB's contrast may be the stronger criterion.

02P0.9–P1.8

Set the pitch from the table

P0.9 suits command centres and close executive viewing; P1.2–P1.5 is the usual boardroom and studio range; P1.8 fits larger rooms where the nearest viewer is beyond 6 m.

03Front-service cartridge

Plan thermal and service access

MIP walls often run all day. Confirm the cabinet thermal path, the front-service route and the spare-module plan before the wall is closed in.

Model comparison

Compare MIP P1.5 models

Pitch, power, cabinet and the job each model is specified for. Open a model to see its cabinet build, service access and quotation route.

Ask for a model recommendation

Model	Brightness	Avg power	Cabinet	Specified for	Detail
MIP P0.9 0.9mm	3,850 nits	≤180 W/m²	600 × 337.5mm	Control rooms · Command centres	View model
MIP P1.2 1.2mm	3,850 nits	≤200 W/m²	600 × 337.5mm	Broadcast studios · Hybrid boardrooms	View model
MIP P1.5Current 1.5mm	3,850 nits	≤220 W/m²	600 × 337.5mm	Security monitoring · Boardrooms	Selected
MIP P1.8 1.8mm	3,850 nits	≤240 W/m²	600 × 337.5mm	Lecture halls · Exhibition spaces	View model

Typical values for the current series. Final brightness, power and cabinet detail are confirmed on the approved specification sheet.

Deployment playbook

Where MIP is the practical choice

MIP is specified when the image must stay stable across mixed lighting and the wall has to remain serviceable in a finished room.

Command centres

Multiple operators view the wall from different angles for long shifts. Uniform black, high refresh and a controlled thermal path keep the surface readable without glare.

P0.9–P1.2 · 3,850 nits · 24/7 plan

Broadcast and studio walls

Camera exposure changes quickly. High refresh and grayscale depth suppress scan lines, while brightness headroom allows the wall to be balanced against studio lighting.

P1.2–P1.5 · >7680Hz · camera-tested drive

Boardrooms and showrooms

The wall is part of the architecture and runs during presentations, video calls and showroom hours. A uniform face and quiet operation matter as much as peak output.

P1.2–P1.8 · low-noise cabinet · front service

Delivery control

MIP build and handover

MIP modules are packaged before cabinet assembly, so batch control and colour matching start earlier in the process. The handover pack records the module batch and calibration.

Handover pack

Approved cabinet layout and pixel map
Control settings and calibration record
Packing list, spare list and service notes

Request the current datasheet

1
Freeze the drawing
Approved layout, pixel map and power schedule
Cabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
2
Match the batch
Batch record and module position list
LED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
3
Age and calibrate
Aging log and calibration file
Assembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
4
Pack for the route
Packing list, spare list and handover pack
Cabinets are packed against the transport method and site access. Packaging includes edge protection and a cabinet position label for each module set.

Buyer questions

Questions we answer before quotation

These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.

Ask an engineer

01MIP or COB for a boardroom?

COB is usually chosen for the deepest black and sealed cleanable surface. MIP is chosen when the room needs more brightness headroom or when the project requires a packaged LED approach. The final choice should be made with a sample under the room's lighting.

02Does MIP need a special control system?

No special control platform is required beyond the compatible receiving cards and drivers specified for the cabinet. The quotation states the control system and the settings used during factory testing.

03Can MIP run continuously?

Yes, with the thermal plan confirmed for the installation. Cabinet spacing, power distribution and ventilation are reviewed for continuous operation, and the recommended spare ratio is stated in the proposal.

04What sizes are available?

The current MIP range covers P0.9, P1.2, P1.5 and P1.8 in 600 × 337.5 mm cabinets. Custom wall sizes are built from the cabinet grid, with the final layout confirmed on the drawing.

Next step