Creative Display

Cylinder LED P4 Outdoor

Name: Cylinder LED P4 Outdoor LED Display
Brand: XL Technology

A weather-sealed cylindrical display for plazas and outdoor advertising columns, with 5,000 nits and IP65 protection.

4mm

Pixel pitch

5,000 nits

Brightness

>7680Hz

Refresh rate

Get Quote Creative Display

Cylinder LED P4 Outdoor cabinet · Cylinder, 1–4m diameter, IP65

Product overview

The outdoor cylinder combines a sealed module path with a round support frame. It is used for freestanding advertising columns and building columns exposed to rain and direct sun.

Every unit is assembled and tested in Shenzhen before packing. Cabinet drawings, pixel map and control-system settings are supplied with the shipment, so the configuration on site matches the quotation.

Public plazasOutdoor advertisingTransit hubsRetail entrances

Specifications

Pixel pitch: 4mm
Brightness: 5,000 nits
Refresh rate: >7680Hz
Avg power: ≤320 W/m²
Cabinet size: Cylinder, 1–4m diameter, IP65
Cabinet weight: 25kg/m²
Protection: IP65
Viewing angle: 360° horizontal
Control system: Novastar / Colorlight compatible
Installation: Foundation base or structural frame
Service: Front module access

Advantages

Engineering decisions behind Cylinder LED P4 Outdoor, and what they change on site.

IP65 sealed surface

Gaskets and sealed cable entries protect the electronics in exposed outdoor locations.

Daylight output

5,000 nits keeps the cylinder readable in a bright plaza and can be dimmed at night.

Engineered base

The foundation or structural connection is sized for the cylinder height and wind load.

Cylinder LED P4 Outdoor

Structure introduction

Cylinder LED P4 Outdoor is engineered around the site rather than a standard cabinet grid. The structure, module layout and mounting points are produced from a drawing that fixes the shape, viewing direction and access route.

Cylinder, 1–4m diameter, IP65

Primary structure

A steel or aluminium frame carries the display and transfers wind and self-weight to the building or foundation. The section is selected from the installation height and site load.

Module layout

Modules are arranged to the drawing, with cut modules and edge details planned so the visible shape matches the design.

Driver and power enclosure

Power supplies and receiving cards sit in a protected enclosure with a service route that does not disturb the visible surface.

Mounting interface

Base plate, wall bracket or suspension points are detailed for the actual structure, including access for adjustment after installation.

Design details

The decisions that affect how Cylinder LED P4 Outdoor looks, installs and stays serviceable on site.

Shape from drawing

The display is not forced into a rectangular cabinet grid. The outline, radius and edge treatment follow the approved drawing.

Viewing direction

Module orientation and brightness are set for the direction people actually approach the installation.

Content mapping

A pixel map is supplied so artwork can be produced for the exact shape without stretching or guessing the active area.

Service route

Access panels and removable modules are planned before fabrication, so maintenance does not require dismantling the artwork.

Front maintenance

Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.

Front-service module design

Access panel service

Service panels are located on the least visible face. Modules and electronics are reached without removing the whole installation.

Module replacement

Replacement modules are supplied to the project drawing. The pixel map identifies the exact position for the replacement.

Structure inspection

Outdoor and pole-mounted units include a fixing and structure inspection schedule in the handover pack.

Product credibility

Documented before it ships

Cylinder LED P4 Outdoor is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.

ISO 9001

Factory process control

CE / RoHS / FCC

Product compliance

Batch tested

Aging and calibration record

2–3 years

Standard warranty

Project references Client feedback

Quality record

CE, RoHS and FCC documentation for the supplied configuration.
Aging and white-balance calibration record per batch.
Cabinet drawing, pixel map and control settings in the handover pack.
Spare modules matched to the original production batch.

Cylinder LED selection and delivery

Choose the cylinder by column diameter and content wrap

Column size, viewing distance, indoor or outdoor exposure and the service seam decide the pitch, frame and module layout. Measure the structure before selecting a model.

01Diameter · height · closest viewer

Measure the column

A 0.5–2m column suits a close-viewed P2.5 wrap, while larger atrium columns move to P3. Outdoor advertising columns run from 1m to 5m with P4 or P5.

02IP65 · 5,000–5,500 nits

Match the environment

Indoor cylinders use a lighter curved frame. Outdoor builds add IP65 sealing and 5,000–5,500 nits for daylight readability.

03Service seam · full wrap · access route

Set the service seam

The access seam is placed on the least visible side. The pixel map covers the full circumference so the image joins cleanly around the column.

Deployment playbook

Where a cylindrical display fits

A cylinder keeps the architectural line of a column while turning the full circumference into a content surface.

Retail atrium column

A structural column becomes a 360° brand feature. Close viewing calls for a fine pitch and a concealed service seam.

P2.5–P3 · 0.8–3m · indoor

Hotel or corporate lobby

A slim cylinder adds movement without building a rectangular wall. Front service keeps maintenance inside the lobby footprint.

P2.5 · 0.5–2m · front service

Outdoor advertising column

A sealed cylinder carries advertising in a plaza or transit forecourt. The base and access panel are engineered for the site.

P4–P5 · 1–5m · IP65

Delivery control

Column survey and curved module layout

The site column is measured, the frame is produced to size and the module layout is set out for a continuous circumference.

Handover pack

Approved cabinet layout and pixel map
Control settings and calibration record
Packing list, spare list and service notes

Request the current datasheet

1
Freeze the drawing
Approved layout, pixel map and power schedule
Cabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
2
Match the batch
Batch record and module position list
LED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
3
Age and calibrate
Aging log and calibration file
Assembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
4
Pack for the route
Packing list, spare list and handover pack
Cabinets are packed against the transport method and site access. The handover pack includes the column survey, pixel map and service-seam drawing.

Buyer questions

Questions we answer before quotation

These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.

Ask an engineer

01Can the cylinder wrap an existing column?

Yes. The frame is produced to the measured column size, with clearance and a service seam agreed before production.

02How is the image joined at the seam?

The pixel map is produced for the full circumference and tested in the factory. The seam is placed on the least visible side and the content is mapped to hide the join.

03What is the largest diameter?

The standard range runs to 5m for the outdoor P5 build. Larger diameters are reviewed as a custom frame and structural design.

04Is front service possible?

Indoor cylinders use front or concealed access, while outdoor cylinders use a sealed service panel. The route is confirmed with the site.

Next step