Transparent LED

Standard Transparent P5.2–10.42

Name: Standard Transparent P5.2–10.42 LED Display
Brand: XL Technology

Balanced transparent cabinet for retail glazing and interior partitions at a four-metre viewing distance.

5.2–10.42mm

Pixel pitch

5,000 nits

Brightness

>7680Hz

Refresh rate

Get Quote Transparent LED

Standard Transparent P5.2–10.42 cabinet · 500 × 1000mm

Product overview

P5.2–10.42 is the usual specification for shop windows and interior glass walls where the audience stands a few metres away. It keeps the interior visible while carrying promotional content.

Every unit is assembled and tested in Shenzhen before packing. Cabinet drawings, pixel map and control-system settings are supplied with the shipment, so the configuration on site matches the quotation.

Shop windowsInterior partitionsMall entrancesCar showrooms

Specifications

Pixel pitch: 5.2–10.42mm
Brightness: 5,000 nits
Refresh rate: >7680Hz
Avg power: ≤240 W/m²
Cabinet size: 500 × 1000mm
Cabinet weight: 7.2kg/m²
Transparency: 70–85%
Cabinet size: 500 × 1000mm
Grayscale: 16-bit
Control system: Novastar / Colorlight compatible
Mounting: Aluminium frame, wall or steel structure

Advantages

Engineering decisions behind Standard Transparent P5.2–10.42, and what they change on site.

Retail viewing balance

At four metres the pitch disappears while transparency stays high enough to see products behind the glass.

Indoor and semi-outdoor use

The sealed cabinet suits covered shopping streets as well as interior partitions.

Simple content setup

Standard media players and processors drive the wall without custom software.

Standard Transparent P5.2–10.42

Structure introduction

Standard Transparent P5.2–10.42 uses a framed transparent cabinet. An aluminium frame carries the LED modules, power supply and receiving card while leaving the centre of each cabinet open.

500 × 1000mm

Aluminium frame

The frame carries the load and provides mounting points for wall, atrium or facade installation.

Transparent module field

LED modules are arranged on a transparent substrate, keeping a percentage of the panel open to light.

Power and control chamber

Power supplies and receiving cards sit in a protected chamber within the frame, accessible for service.

Sealed outdoor option

Outdoor versions add sealing and a weather-rated rear cover for facade and atrium installations.

Design details

The decisions that affect how Standard Transparent P5.2–10.42 looks, installs and stays serviceable on site.

Transparency and brightness balance

The open area and LED package are selected for the background and viewing distance, so the screen does not read as a dark panel.

Cabinet depth

The frame depth is kept compact for window and atrium installations where clearance is limited.

Seam planning

Cabinet datums are set from the frame, keeping the module grid aligned across a large transparent wall.

Service access

Modules and electronics are reachable from the front or rear depending on the mounting condition.

Front maintenance

Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.

Front-service module design

Front or rear module access

Service direction is agreed at design stage. Where rear access is impossible, front-service modules are specified.

Power and card replacement

Receiving cards and power supplies are field-replaceable units within the frame chamber.

Seal and cleaning checks

Outdoor installations include gasket inspection and a cleaning procedure that protects the transparent substrate.

Product credibility

Documented before it ships

Standard Transparent P5.2–10.42 is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.

ISO 9001

Factory process control

CE / RoHS / FCC

Product compliance

Batch tested

Aging and calibration record

2–3 years

Standard warranty

Project references Client feedback

Quality record

CE, RoHS and FCC documentation for the supplied configuration.
Aging and white-balance calibration record per batch.
Cabinet drawing, pixel map and control settings in the handover pack.
Spare modules matched to the original production batch.

Standard transparent selection

Use a framed cabinet when the opening needs structure

Standard transparent cabinets are selected when the installation needs a stable frame, a larger opening or an outdoor rating. The cabinet layout and service direction are fixed early.

01IP65 outdoor option

Indoor or outdoor exposure

Indoor cabinets are used for atriums, windows and transport hubs. Outdoor versions add sealing, a weather-rated rear cover and a fixing detail for the facade.

02500 × 500 / 500 × 1000 mm

Set the opening grid

The 500 × 500 and 500 × 1000 mm cabinets are laid out to the finished opening. Edge trim and structural fixing are planned with the cabinet grid, not after it.

03Front or rear service

Choose the service side

Front service is used where the wall faces a road or atrium with no rear access. Rear service is used where a walkway or plant room is available.

Model comparison

Compare Standard Transparent P5.2–10.42 models

Pitch, power, cabinet and the job each model is specified for. Open a model to see its cabinet build, service access and quotation route.

Ask for a model recommendation

Model	Brightness	Avg power	Cabinet	Specified for	Detail
Crystal Film P6.25 6.25mm	4,500 nits	≤180 W/m²	Film roll, cut to glass	Shop windows · Bank branches	View model
Crystal Film P10 10mm	4,000 nits	≤150 W/m²	Film roll, cut to glass	Glass facades · Bank branches	View model
Holographic P3.9 3.9mm	1,500–8,000 nits	≤260 W/m²	Hanging mesh, 500 × 500mm	Retail launches · Exhibitions	View model
Holographic P6.25 6.25mm	1,500–8,000 nits	≤220 W/m²	Hanging mesh, 500 × 1000mm	Atrium suspensions · Window displays	View model
Standard Transparent P3.91–7.8 3.91–7.8mm	5,500 nits	≤280 W/m²	500 × 500 / 500 × 1000mm	Building facades · Atrium walls	View model
Standard Transparent P5.2–10.42Current 5.2–10.42mm	5,000 nits	≤240 W/m²	500 × 1000mm	Shop windows · Interior partitions	Selected
Standard Transparent P10.42 10.42mm	5,000 nits	≤200 W/m²	500 × 1000mm	Glass facades · Atrium glazing	View model

Typical values for the current series. Final brightness, power and cabinet detail are confirmed on the approved specification sheet.

Deployment playbook

Framed transparency in architecture

The standard cabinet is the route for larger openings where the display needs a structure and a predictable service plan.

Shopping mall atriums

The wall spans a large opening and is seen from multiple levels. The frame holds alignment and the transparent field keeps the architecture visible.

P3.91–7.8 · 75–90% transparency

Building facades

Outdoor cabinets carry the display across a facade. Wind load, fixing and service access are reviewed with the building structure.

P7.8–15.6 · IP65 · wind-load frame

Transport hubs

Information and advertising run through glass walls without blocking daylight. The cabinet layout follows the structural mullions.

P3.91–7.8 · high-brightness option

Delivery control

Framed transparent delivery

The cabinet grid, edge trim and fixing schedule are issued together. Outdoor orders add the seal and drainage check before packing.

Handover pack

Approved cabinet layout and pixel map
Control settings and calibration record
Packing list, spare list and service notes

Request the current datasheet

1
Freeze the drawing
Approved layout, pixel map and power schedule
Cabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
2
Match the batch
Batch record and module position list
LED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
3
Age and calibrate
Aging log and calibration file
Assembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
4
Pack for the route
Packing list, spare list and handover pack
Cabinets are packed against the transport method and site access. Outdoor cabinets are packed with the seal kit, fixing schedule and service procedure for the facade.

Buyer questions

Questions we answer before quotation

These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.

Ask an engineer

01Can standard transparent cabinets be used outdoors?

Yes, the outdoor version adds IP65 sealing and a weather-rated rear cover. The fixing detail and wind load are reviewed with the building structure.

02How much transparency is lost with a frame?

The framed cabinet typically provides 75–90% transparency depending on pitch and model. The frame carries the modules and power, so the open area is balanced against structural needs.

03Can the wall follow a mullion grid?

Yes. The cabinet layout is set out around the structural mullions and finished opening, with edge trim detailed to close the remaining gaps.

04What service access is required?

Front service is available where there is no rear walkway. The service direction and access panel positions are confirmed on the approved drawing.

Next step